bz2 --- 对 bzip2 压缩算法的支持

源代码: Lib/bz2.py


此模块提供了使用 bzip2 压缩算法压缩和解压数据的一套完整的接口。

bz2 模块包含:

此模块中的所有类都能安全地从多个线程访问。

文件压缩和解压

bz2.open(filename, mode='r', compresslevel=9, encoding=None, errors=None, newline=None)

以二进制或文本模式打开 bzip2 压缩文件,返回一个 file object

BZ2File 的构造函数类似,filename 参数可以是一个实际的文件名(strbytes 对象),或是已有的可供读取或写入的文件对象。

mode 参数可设为二进制模式的 'r''rb''w''wb''x''xb''a''ab',或者文本模式的 'rt''wt''xt''at'。默认是 'rb'

compresslevel 参数是 1 到 9 的整数,和 BZ2File 的构造函数一样。

For binary mode, this function is equivalent to the BZ2File constructor: BZ2File(filename, mode, compresslevel=compresslevel). In this case, the encoding, errors and newline arguments must not be provided.

For text mode, a BZ2File object is created, and wrapped in an io.TextIOWrapper instance with the specified encoding, error handling behavior, and line ending(s).

3.3 新版功能.

在 3.4 版更改: 添加了 'x' (仅创建) 模式。

在 3.6 版更改: 接受一个 类路径对象

class bz2.BZ2File(filename, mode='r', buffering=None, compresslevel=9)

用二进制模式打开 bzip2 压缩文件。

If filename is a str or bytes object, open the named file directly. Otherwise, filename should be a file object, which will be used to read or write the compressed data.

The mode argument can be either 'r' for reading (default), 'w' for overwriting, 'x' for exclusive creation, or 'a' for appending. These can equivalently be given as 'rb', 'wb', 'xb' and 'ab' respectively.

If filename is a file object (rather than an actual file name), a mode of 'w' does not truncate the file, and is instead equivalent to 'a'.

The buffering argument is ignored. Its use is deprecated since Python 3.0.

If mode is 'w' or 'a', compresslevel can be an integer between 1 and 9 specifying the level of compression: 1 produces the least compression, and 9 (default) produces the most compression.

If mode is 'r', the input file may be the concatenation of multiple compressed streams.

BZ2File provides all of the members specified by the io.BufferedIOBase, except for detach() and truncate(). Iteration and the with statement are supported.

BZ2File also provides the following method:

peek([n])

Return buffered data without advancing the file position. At least one byte of data will be returned (unless at EOF). The exact number of bytes returned is unspecified.

注解

While calling peek() does not change the file position of the BZ2File, it may change the position of the underlying file object (e.g. if the BZ2File was constructed by passing a file object for filename).

3.3 新版功能.

3.0 版后已移除: The keyword argument buffering was deprecated and is now ignored.

在 3.1 版更改: 支持了 with 语句。

在 3.3 版更改: The fileno(), readable(), seekable(), writable(), read1() and readinto() methods were added.

在 3.3 版更改: Support was added for filename being a file object instead of an actual filename.

在 3.3 版更改: The 'a' (append) mode was added, along with support for reading multi-stream files.

在 3.4 版更改: 添加了 'x' (仅创建) 模式。

在 3.5 版更改: The read() method now accepts an argument of None.

在 3.6 版更改: 接受一个 类路径对象

增量压缩和解压

class bz2.BZ2Compressor(compresslevel=9)

Create a new compressor object. This object may be used to compress data incrementally. For one-shot compression, use the compress() function instead.

compresslevel, if given, must be an integer between 1 and 9. The default is 9.

compress(data)

Provide data to the compressor object. Returns a chunk of compressed data if possible, or an empty byte string otherwise.

When you have finished providing data to the compressor, call the flush() method to finish the compression process.

flush()

结束压缩进程,返回内部缓冲中剩余的压缩完成的数据。

The compressor object may not be used after this method has been called.

class bz2.BZ2Decompressor

Create a new decompressor object. This object may be used to decompress data incrementally. For one-shot compression, use the decompress() function instead.

注解

This class does not transparently handle inputs containing multiple compressed streams, unlike decompress() and BZ2File. If you need to decompress a multi-stream input with BZ2Decompressor, you must use a new decompressor for each stream.

decompress(data, max_length=-1)

Decompress data (a bytes-like object), returning uncompressed data as bytes. Some of data may be buffered internally, for use in later calls to decompress(). The returned data should be concatenated with the output of any previous calls to decompress().

If max_length is nonnegative, returns at most max_length bytes of decompressed data. If this limit is reached and further output can be produced, the needs_input attribute will be set to False. In this case, the next call to decompress() may provide data as b'' to obtain more of the output.

If all of the input data was decompressed and returned (either because this was less than max_length bytes, or because max_length was negative), the needs_input attribute will be set to True.

Attempting to decompress data after the end of stream is reached raises an EOFError. Any data found after the end of the stream is ignored and saved in the unused_data attribute.

在 3.5 版更改: Added the max_length parameter.

eof

若达到了数据流末尾标识符则为 True

3.3 新版功能.

unused_data

压缩数据流的末尾还有数据。

If this attribute is accessed before the end of the stream has been reached, its value will be b''.

needs_input

False if the decompress() method can provide more decompressed data before requiring new uncompressed input.

3.5 新版功能.

一次性压缩或解压

bz2.compress(data, compresslevel=9)

Compress data, a bytes-like object.

compresslevel, if given, must be an integer between 1 and 9. The default is 9.

For incremental compression, use a BZ2Compressor instead.

bz2.decompress(data)

Decompress data, a bytes-like object.

If data is the concatenation of multiple compressed streams, decompress all of the streams.

For incremental decompression, use a BZ2Decompressor instead.

在 3.3 版更改: 支持了多数据流的输入。

用法示例

Below are some examples of typical usage of the bz2 module.

Using compress() and decompress() to demonstrate round-trip compression:

>>> import bz2
>>> data = b"""\
... Donec rhoncus quis sapien sit amet molestie. Fusce scelerisque vel augue
... nec ullamcorper. Nam rutrum pretium placerat. Aliquam vel tristique lorem,
... sit amet cursus ante. In interdum laoreet mi, sit amet ultrices purus
... pulvinar a. Nam gravida euismod magna, non varius justo tincidunt feugiat.
... Aliquam pharetra lacus non risus vehicula rutrum. Maecenas aliquam leo
... felis. Pellentesque semper nunc sit amet nibh ullamcorper, ac elementum
... dolor luctus. Curabitur lacinia mi ornare consectetur vestibulum."""
>>> c = bz2.compress(data)
>>> len(data) / len(c)  # Data compression ratio
1.513595166163142
>>> d = bz2.decompress(c)
>>> data == d  # Check equality to original object after round-trip
True

Using BZ2Compressor for incremental compression:

>>> import bz2
>>> def gen_data(chunks=10, chunksize=1000):
...     """Yield incremental blocks of chunksize bytes."""
...     for _ in range(chunks):
...         yield b"z" * chunksize
...
>>> comp = bz2.BZ2Compressor()
>>> out = b""
>>> for chunk in gen_data():
...     # Provide data to the compressor object
...     out = out + comp.compress(chunk)
...
>>> # Finish the compression process.  Call this once you have
>>> # finished providing data to the compressor.
>>> out = out + comp.flush()

The example above uses a very "nonrandom" stream of data (a stream of b"z" chunks). Random data tends to compress poorly, while ordered, repetitive data usually yields a high compression ratio.

Writing and reading a bzip2-compressed file in binary mode:

>>> import bz2
>>> data = b"""\
... Donec rhoncus quis sapien sit amet molestie. Fusce scelerisque vel augue
... nec ullamcorper. Nam rutrum pretium placerat. Aliquam vel tristique lorem,
... sit amet cursus ante. In interdum laoreet mi, sit amet ultrices purus
... pulvinar a. Nam gravida euismod magna, non varius justo tincidunt feugiat.
... Aliquam pharetra lacus non risus vehicula rutrum. Maecenas aliquam leo
... felis. Pellentesque semper nunc sit amet nibh ullamcorper, ac elementum
... dolor luctus. Curabitur lacinia mi ornare consectetur vestibulum."""
>>> with bz2.open("myfile.bz2", "wb") as f:
...     # Write compressed data to file
...     unused = f.write(data)
>>> with bz2.open("myfile.bz2", "rb") as f:
...     # Decompress data from file
...     content = f.read()
>>> content == data  # Check equality to original object after round-trip
True